In the rare emergency instance that you need to remove the Keyless360 lock from a locker, please follow these lock drilling instructions to avoid locker door damage.
MANAGERS: EMERGENCY ACCESS VIDEO
In a rare situation when the Master Key is lost, inaccessible, or inoperable— and the lock needs to be removed from the locker door for an emergency, please follow these lock drilling instructions to avoid locker door damage.
DRILLING OUT THE KEYLESS360 LOCK
Keyless.Co, LLC is not responsible for locker door damage due to improper lock removal.
2-STEP EMERGENCY REMOVAL OF KEYLESS1
While Keyless360 locks are secure and have a very low defect rate, there may be rare situations where it is necessary to remove the lock to open the locker.
For example, if the Master Key is missing and the locker is locked with an unknown code, you may need to drill through to open the lock.
To do this, you will need a power drill, a 5.5mm drill bit, and a wrench or other tool to hold the knob.
Please take caution when drilling, as Keyless.Co warranty does not cover damage to lockers.
While grasping the knob with a wrench, place the drill bit directly on the bottom screw head and begin drilling straight until the bit passes into the door.
Repeat the same process for the top screw.
Once both screws are drilled through, you can remove the lock, and the door will open freely.
When it is necessary to do this, you may reach out to Keyless.Co or the locker manufacturer to obtain a new lock.
Still Need Assistance?
Our live, U.S. BASED representatives would love to talk to you.
1825 W. Walnut Hill Ln STE 102 Irving, TX 75038, USA