Keyless1 Instructions

All of the resources you need to successfully install, reset, and grant access.


In a rare situation when the Master Key is lost, inaccessible, or inoperable— and the lock needs to removal from the locker door for an emergency, please follow these lock drilling instructions to avoid locker door damage. Keyless.Co, LLC is not responsible for locker door damage due to improper lock removal.


Please drill carefully to avoid door damage. Keyless.Co, LLC is not responsible and will not cover damaged locker doors.


  • While Keyless1 locks are secure and have a very low defect rate, there may be rare situations where it is necessary to remove the lock to open the locker.

  • For example, if the Master Key is missing or compromised and the locker is locked with an unknown code, you may need to drill through to open the lock.

  • To do this, you will need a power drill, a 1/2” (12.7mm) drill bit, and a wrench or other tool to hold the knob.

  • Please take caution when drilling, as Keyless.Co warranty does not cover damage to lockers.

  • While grasping the knob with the wrench, place the drill bit in the center of the knob and begin drilling.

  • You will drill through the lock until the cam assembly falls off of the back of the lock and the locker will then open freely.

  • In the event of an emergency lock removal, please contact Keyless.Co or the locker manufacturer to report the damaged lock and obtain a new lock.

Need Further Keyless1 Instructions?

Our live, U.S. BASED representatives would love to talk to you.

Since the inception of the Keyless1 in 2012, Keyless.Co has risen to be the global leader of the keyless revolution in locker LOCK security in over 60 countries.

Call Now Button